Sanyo LC-2430 - Manual (Page 10)

E6
Choose the dialing mode
Depending on your dialing system, set the PULSE-TONE switch as follows:
If your dialing system is Set the switch to
Tone TONE
Pulse PULSE
If you are not sure of your dialing system
Make a trial call with the PULSE-TONE switch set to TONE.
If the call connects, leave the switch as is; otherwise, set to PULSE.
PULSE TONE
• Use only the supplied AD-350 AC adaptor. Do not use any other AC adaptor.
• Connect the AC adaptor to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug the AC adaptor easily.
• If your telephone outlet is not modular, contact your telephone company for assistance.
Notes:
GETTING
STARTED
CLT2430 5th 8/9 8/10/00 4:28 PM Page 10