Sennheiser 500 Series - Manual (Page 22)

Using the devices
20
To activate the RF signal :
SKM 500 radio microphone
To switch the radio microphone on (online operation):
To switch the radio microphone off :
̈
If necessary, deactivate the lock mode (see page 22).
To switch the radio microphone on and to deactivate the RF signal on switch-on (offline oper-
ation):
Use this function to save battery power or to prepare a bodypack transmitter for use
during live operation without causing interference to existing transmission links.
̈
Briefly press the ON / OFF button
Ƹ
.
“ RF Mute Off ” appears on the display panel.
̈
Press the SET button
¶
.
The transmission icon
ብ
is displayed again.
̈
Briefly press the ON / OFF button
¹
.
The radio microphone transmits an RF signal. The transmission icon
ብ
is
displayed.
The red
ON LED
¾
lights up and the standard display “ Frequency/Name ”
appears on the display panel.
You can switch the radio microphone on and deactivate the RF signal on switch-on .
For more information, see below.
̈
Press the ON / OFF button
¹
until “ OFF ” appears on the display panel. The red
ON LED
¾
goes off and the display panel turns off.
When in the operating menu, pressing the ON / OFF button
¹
will cancel your entry
(ESC function) and return you to the current standard display.
̈
Press the ON / OFF button
¹
until “ RF Mute On? ” appears on the display panel.
SET
SET
¹
¾
ON/OFF
ON/OFF
SET