Sennheiser 500 Series - Manual (Page 26)

Using the devices
24
SKM 500
You can deactivate the RF signal on switch-on. For more information, refer to the chapter
“Switching the devices on/off” on page 20.
To deactivate the RF signal during operation:
Audio signal is muted
Transmitter’s display panel: “ MUTE ”
ቨ
is displayed
Receiver’s display panel: “ TX Mute ” is displayed *
* only when activated on the receiver (see above)
Audio signal is activated (muting is deactivated)
Transmitter’s display panel: “ MUTE ” ቨ is not displayed
Receiver’s display panel: “ TX Mute ” is not displayed
RF signal is deactivated
Transmitter’s display panel: Transmission icon
ብ
is not displayed
Receiver’s display panel: “ RF Mute ” is displayed *
* only when activated on the receiver (see above)
RF signal is activated
Transmitter’s display panel: Transmission icon
ብ
is displayed
Receiver’s display panel: “ RF Mute ” is not displayed
You can also deactivate the RF signal on switch-on. For more information, refer to
the chapter “Switching the devices on/off” on page 18.
Using the ON / OFF button, you can also activate/deactivate the RF signal during
operation. To do so, briefly press the ON / OFF button and proceed as described on
page 19.
̈
When one of the standard displays is shown on the display panel, press the
ON / OFF button.
“ RX Mute On? ” appears on the display panel.
̈
Proceed as described on page 20.
SET