SMC Networks TigerSwitch 100 - Manual (Page 135)

M
ULTICAST
C
ONFIGURATION
2-105
• VLAN ID – Selects the VLAN to propagate all multicast traffic
coming from the attached multicast router/switch.
• Port or Trunk – Specifies the interface attached to a multicast router.
Web – Click IGMP, Static Multicast Router Port Configuration. Specify
the interfaces attached to a multicast router, indicate the VLAN which will
forward all the corresponding multicast traffic, and then click Add. After
you have completed adding interfaces to the list, click Apply.
CLI – This example configures port 11 as a multicast router port within
VLAN 1.
Displaying Port Members of Multicast Services
You can display the port members associated with a specified VLAN and
multicast IP address.
Command Attribute
• VLAN ID – Selects the VLAN in which to display port members.
Console(config)#ip igmp snooping vlan 1 mrouter ethernet 1/11 3-148
Console(config)#exit
Console#show ip igmp snooping mrouter vlan 1
3-149
VLAN M'cast Router Port Type
---- ------------------ -------
1 Eth 1/11 Static