Samsung SCX-6555NX User Manual

Page 99

Advertising
background image

99

Paper Jam in tray 1

Paper misfed from

tray

Or paper has jammed

in the tray feed area.

Or the tray cover is

opened.

Clear the jam. (See "In

the tray 1" on page 91

and see "In the optional

tray" on page 92 and

see "In the optional

high capacity

feeder" on page 93)

Paper Jam in tray 2

Paper Jam in tray 2

(HCF)

Paper Jam in tray 3

Paper Jam in tray 3

(HCF)

Paper Jam in tray 4

Paper jam inside

finisher’s duplex

Paper jammed in the

stacker.

Open the stacker door

and remove jammed

paper by lowering

guide 1a or 1b.

Paper Jam inside of

duplex path

Paper has jammed

during duplex printing.

Clear the jam. (See "In

the multi-purpose

tray" on page96)

Paper Jam inside of

machine

Paper has jammed in

the registration area.

Clear the jam. (See "In

the multi-purpose

tray" on page96)

Scanner locking

switch is locked or

another problem

occurred

The CCD (Charged

Couple Device) lock

has been locked. The

CCD does not detect

its home location or

move.

Unlock the CCD lock.

(See "In the multi-

purpose tray" on

page96) Or turn off the

machine and on again.

Try again. If the

problem persists, call

for service.

Shake toner

cartridge

The toner supply is

low.

Thoroughly roll the new

cartridge five or six

times to distribute the

toner evenly inside the

cartridge.

Staple cartridge is

empty. Replace it

Stapler is run out.

Order Staple Cartridge.

(See "In the multi-

purpose tray" on

page96) And replace it.

(See "In the multi-

purpose tray" on

page96)

Staple cartridge is

not installed. Install

it in finisher

The staple cartridge is

not installed.

Install the staple

cartridge following the

steps explained on the

back of the finisher

door. (See "In the multi-

purpose tray" on

page96) If you want to

continue the print job

and disregard of this

error message, go to

Admin Setting to

adjust the option. (See

"In the multi-purpose

tray" on page96)

MESSAGE

MEANING

SUGGESTED

SOLUTIONS

System error: [zzz].

Please turn off then

on

There is a problem in

the system operation.

Turn the machine off

and turn it on again. If

the problem persists,

please call for service.

This IP address

conflicts with an IP

address already in

use. Check it

The IP address is

used in other place

elsewhere.

Check the IP address

or obtain a new IP

address.

Toner cartridge is

not compatible.

Check user’s guide

The toner cartridge

you have installed is

not for your machine.

Install a Samsung-

genuine toner cartridge,

designed for your

machine.

Toner cartridge is

not installed. Install

it

The toner cartridge is

not installed or the

CRUM (Consumer

Replaceable Unit

Monitor) in the

cartridge is not

properly connected.

Try to reinstall the toner

cartridge.

Replace with new

toner cartridge

The toner cartridge is

at the end of its life.

When the toner

cartridge replacement

message appears on

the screen and if you

select Continue, this

message displays.

Rplace a toner

cartridge with a

Samsung-genuine

toner cartridge. (See "In

the multi-purpose

tray" on page96)

End of life, Replace

with new toner

cartridge

The lifespan of the

toner cartridge which

the arrow indicates is

reached.

This message appears

when the toner is

completely empty, and

your machine stops

printing. Replace the

toner cartridge with a

Samsung-genuine

toner cartridge. (See "In

the multi-purpose

tray" on page96)

Prepare new toner

cartridge

The toner cartridge is

almost empty.

Ensure a replacement

cartridge is in stock.

Too much paper in

finisher stacker.

Remove printed

paper

The stacker is full of

printouts.

Remove printouts from

the stacker.

Too much paper in

output bin tray.

Remove printed

paper

The printed papers

are full on the output

tray.

Remove printed outs

from the output tray.

Use Auxiliary

Access

The credit is not

enough to access the

job according to

Foreign Device.

Insert credit into the

Foreign Device.

MESSAGE

MEANING

SUGGESTED

SOLUTIONS

Advertising