Snapper 1693755 - Manual (Page 18)

17
Removing & Attaching
Removing & Attaching Hitch
1. Remove the safety clip (K, Figure 25).
2. Remove the spring clips (C) securing the rear hitch
bracket (A) to the lift lever rod (B).
3. See Figure 26. Remove the caspcrew from location
(A). Depress the lift lever release button and rotate
the lever forward until the lever latch clears the
mounting bracket. Slide the lever and rod assembly
out of the hitch bracket and mounting bracket.
4. See Figure 27. Remove the safety clip (C) and long
hitch pin (B) from the front of the hitch. Remove the
hitch from the front tractor brackets.
Install in reverse order of removal.
2
3
1
Figure 26. Lift Lever Removal
A. Capscrew Location (Remove)
A
J
I
H
D
C
A
F
E
G
B
Figure 25. Installing Hitch to Rear Bracket
A. Rear Bracket
G. Capscrew, 3/8-16 x 2
B. Lift Lever Rod H. Spacer, 25/64 x 5/8 x 17/64
C. Hairpin Clip I. Spacer, 13/32 x 1 x 13/16
D. Washer J. Nut, Whizlock, 3/8-16
E. Hitch K. Hairpin Clip
F. Clevis Pin
K
C
A
B
Figure 27. Installing Hitch to Front of Tractor
A. Hitch Bar
D. Tractor Brackets
B. Hitch Pin E. Up-Stop Brackets
C. Safety Clip
D
E