Sony ICF-SW1000TS - Manual (Page 12)

Radio
12 EN
RADIO POWER ON/OFF
FM/AM AM BAND
Radio
–1¿, ¿,
ч, ч1+
1 2 3
4 5 6
7 8 9
0
Various tuning methods for optimum
reception
Manual tuning
Use –1¿ ,¿ ,÷ ,and ÷1+ search for the
desired broadcast station. Use the outer
buttons to search rapidly in large frequency
increments. Use the inner buttons to search
precisely in small frequency increments.
1
Turn on the radio.
2
Select either FM or AM.
Select AM to listen to SW, MW or LW.
3
When you select AM, press –1¿ or ÷1+ while
pressing AM BAND to select MW, LW or meter
band (SW).
Skip this step and proceed to step 4 if you wish to listen
to FM.
4
Press –1¿ ,¿ ,÷ ,and ÷1+ repeatedly to search
for the desired broadcast station.
Each time the buttons are pressed, the channel step
changes as shown below.
Band –1¿ or ÷1+ ¿ or ÷
FM 0.05 MHz 0.05 MHz
SW 5 kHz 1 kHz
MW 9/10 kHz 1 kHz
LW 9 kHz 1 kHz
SSB (AM) 1 kHz 0.1 kHz **
** Units of 0.1 kHz is not indicated in the display.
Tips
• The previously tuned
broadcast station is
received when you turn
on the radio.
• When ¿ or ÷ is
pressed repeatedly in
the AM band (MW,
SW, and LW), the
frequency repeats
through the range of
150–29,999 kHz to
enable search of all
available broadcast
stations (not applicable
for the Italian model*).
* For the Italian model,
when ¿ or ÷ is
pressed repeatedly in
the AM band (MW,
SW, and LW), the
frequency repeats
through the ranges of
150–285 kHz, 530–
1620 kHz and 3850–
26,100 kHz.