Sennheiser EM 3732 User Manual

Page 83

Advertising
background image

35

The operating menu

Releasing channels that are used or subject to interference

Scan reset

After the scan, the channels that are occupied or subject to interference
are marked with a warning triangle and the text “

Freq. occupied

” in the

Tune

” menu. Via the “

Scan reset

” menu, you can unmark these channels.

The last scan result is deleted.

̈

Turn the jog dial

7

until the arrow points to

Scan reset

”.

̈

Press the jog dial

7

.

The number of free channels is reset to the maximum for all frequency
banks.

̈

Turn the jog dial

7

to select a frequency bank.

̈

Press the

save

button

8

.

The selected frequency bank is automatically called up in the “

B.Ch

menu.

Multi-channel operation

Combined with Sennheiser 3000 and 5000 series transmitters, the
receivers can form transmission links that are suitable for multi-channel
operation.

Before putting the transmission links into operation, we recommend that
you perform a scan in order to find a frequency bank with a sufficient
number of free channels:

̈

Switch all transmitters off.

̈

Use a receiver to scan all frequency banks for free channels (see
“Scanning the frequency banks for interference-free channels” on
page 33).

̈

Select a frequency bank with a sufficient number of free channels (see
“Selecting a frequency bank and a channel” on page 28).

̈

Set each transmitter/receiver pair in your multi-channel system to a
different free channel within this frequency bank.

Channel list
Scan new
Scan reset

Bank 4 5 6 U
Free 32 31 33 60

Bank 1 2

3

Free 43 40 42

esc

s

ave

syn

c

digital audio

processing

syn

c

DEV

M

H

z

790.800

03.03

BANK

CH

COM

AF

CAUTION!

Risk of reception interference!

If – within the receiver’s frequency range – transmitters
transmit on channels from different frequency banks, reception
can be subject to interference and inter-modulation. Only the
factory-preset frequencies within the frequency banks “1” to
“6” are interference and inter-modulation free.

̈

Set all transmitters of a multi-channel system to different
channels within the same frequency bank.

EM3732_516551_0108_Sp6.book Seite 35 Dienstag, 18. Dezember 2007 11:55 11

Advertising