Sony CLIE PEG-TG50 - Manual (Page 23)

23
I ca
nnot pe
rf
orm a
H
o
tS
y
n
c
®
ope
ra
ti
on
B Should a problem occur when the Speed setting in the Setup/Modem
window of HotSync Manager is As fast as possible or at a certain
speed, try setting at a lower speed.
B Check that the Speed setting in the Setup/Modem window is
appropriate for your modem.
B Turn off the modem for a while and turn it on before connecting it again.
I cannot perform an IR HotSync
®
operation
B Check that the IR port of your computer is enabled.
B An IR HotSync
®
operation is not available if your computer does not have
an IR port.
B Check that the HotSync icon is displayed in the task tray in the bottom
right-hand corner of your computer screen and the HotSync Manager is
running. When the HotSync Manager is running, the shortcut menu should
be displayed by clicking the HotSync
icon.
B If you are using Windows ®
2000 Professional/Windows
®
XP, click the
HotSync icon in the bottom right-hand corner of your computer screen
and check that the Beaming check box is selected.
B If you are using Windows ®
98 Second Edition/Windows
®
Millennium
Edition, click the HotSync icon in the bottom right-hand corner of
your computer screen and check that the Local Serial check box is
selected.
B If you are using Windows ®
98 Second Edition/Windows
®
Millennium
Edition, click the HotSync icon in the bottom right-hand corner of
your computer screen and click the Local tab in the Setup window. Then
check that the simulated port for IR communication is selected in Serial
Port.
B Check that Local and IR to a PC/handheld are selected in the HotSync
screen on your CLIÉ handheld.
I cannot perform a HotSync
®
operation via a modem
Continued on next page
• • • • • • • • • • • • • • • • • • • • • • • • •