Siemens GIGASET SX255 - Manual (Page 11)

10
Getting started
Gigaset SX205-255i / englisch / A31008-X255-B100-1-7619 / operation.fm / 09.10.2003
Manually registering a Gigaset S1 / SL1 handset
After registration the handset reverts to idle status. The handset's internal number is
shown in the display.
Manually registering a Gigaset C1 / C2 handset
After registration the handset reverts to idle status. The handset's internal number is
shown in the display.
v Open the menu.
s
Settings
Select the menu item and confirm.
s
Register H/Set
Select the menu item and confirm.
s
Base 1
Select base (1–4) and confirm, e. g. Base 1.
~ Enter the system PIN of the base (factory setting:
0000) and confirm. In the display are Regstr.Proce-
dure
and the name of the base, e. g. Base 1.
Once the handset has located the base, the list of
free internal numbers is shown in the display.
Press lit Register key on the base (page 9), key
flashes. The base is only ready for registering while
the key is flashing.
s
Int.11 Select internal number and confirm, e. g. Int.11 .
OK
OK
OK
OK
OK
MENU
Open the menu.
s
Handset Settings OK
Select the menu item and confirm.
s
Register Handset OK Select the menu item and confirm.
s
Base 1 OK Select base (1–4) and confirm, e. g. Base 1.
~
OK Enter the system PIN of the base (factory setting:
0000) and confirm. In the display are Registering
and the name of the base, e. g. Base 1.
Once the handset has located the base, the list of
free internal numbers is shown in the display.
Press lit Register key on the base (page 9), key
flashes. The base is only ready for registering while
the key is flashing.
s
Int.11 OK
Select internal number and confirm, e. g. Int.11 .