Siemens GIGASET SX255 - Manual (Page 13)

12
Getting started
Gigaset SX205-255i / englisch / A31008-X255-B100-1-7619 / operation.fm / 09.10.2003
Registering a Gigaset 3000 Comfort/Micro handset
The next unassigned internal number between Int.11 and Int.18 is automatically
assigned to the handset as it is registered.
Registering a Gigaset 3000 Classic handset
− Hold down, to turn on the handset.
either ...
OK
Confirm the prompt.
or ...
. Open the menu.
s
Stations OK
Select the menu item and confirm.
s
Station 1
Í Select the base (1-4) and open the sub-menu.
s
Registration OK Select the menu item and confirm.
... then
~
OK Enter the system PIN of the base (factory setting:
0000) and confirm.
Press lit Register key on the base (page 9), key
flashes. The base is only ready for registering while
the key is flashing.
s
Int.11 OK Select internal number and confirm, e. g. Int.11 . The
successful registration is confirmed on the display.
− Hold down, to turn on the handset.
¦ ¨ « Press in turn.
~
OK
Enter the number of the base (normally 1) and con-
firm. The Standby symbol CCCC flashes and then lights
up constantly when the connection to the base has
been established.
~
OK
Enter the system PIN of the base (factory setting:
0000) and confirm.
Press lit Register key on the base (page 9), key
flashes. The base is only ready for registering while
the key is flashing.
s
Int.11 OK
Select internal number and confirm, e. g. Int.11 . The
Standby symbol is extinguished after successful reg-
istration.