Siemens GIGASET SX255 - Manual (Page 14)

13
Getting started
Gigaset SX205-255i / englisch / A31008-X255-B100-1-7619 / operation.fm / 09.10.2003
Registering a Gigaset 2000 C handset
Registering a Gigaset 2000S / Gigaset 1000 C/S handset
For the registration procedure described below:
You can register a maximum of four other handsets (e. g. Gigaset 2000S, GAP handsets)
or wireless devices (e. g. Gigaset 1000 TAE, STA). Register these devices first.
Registering a Gigaset 2000S handset
The lowest free internal number is assigned. It is not possible to select a free internal
number.
Registering a Gigaset 1000 C/S handset
For the registration procedures, please refer to the corresponding operating instruc-
tions.
h Press to turn on the handset.
. Open the menu.
s
Settings OK
Select the menu item and confirm.
s
Registration OK
Select the menu item and confirm.
s
Station 1 OK
Select base (1-4) and confirm.
Í Open the submenu.
s
Registration OK
Select the menu item and confirm.
~
OK Enter the system PIN of the base (factory setting:
0000) and confirm.
Press lit Register key on the base (page 9), key
flashes. The base is only ready for registering while
the key is flashing.
s
Int.11 OK Select internal number and confirm, e. g. Int.11 . The
successful registration is confirmed on the display.
h Press h (off) .
o h Simultaneously press the number of the base station
and h (on) .
o Enter system code.
Press lit Register key on the base (page 9), key
flashes. The base is only ready for registering while
the key is flashing.