Siemens GIGASET SX255 - Manual (Page 34)

33
Appendix
Gigaset SX205-255i / englisch / A31008-X255-B100-1-7619 / appendix.fm / 09.10.2003
Appendix
Care
Wipe the base and handset with a damp cloth (no solvents) or an antistatic cloth. Never
use a dry cloth. This can cause static discharge.
Contact with liquid
If the handset should come into contact with liquid, on no account switch the device
on. Remove all batteries immediately.
Allow the liquid to drain out of the device, and then pat all parts of the device dry.
Keep the handset with the batteries removed in a warm, dry place for at least 72 hours.
In many cases, you will then be able to use it again.
Questions and Answers
If you have any questions about the use of your phone, you can contact us 24 hours a
day at www.my-siemens.com/customercare. You will find the most frequently asked
questions and the corresponding answers below.
!
What has happened if … Possible Cause Possible solution
… the handset or the base
does not ring?
The ringer is switched off.
Call forwarding is set to Immedi-
ately .
Night service is active.
Activate the ringer for the
handset or the base.
Switch off call forwarding.
Deactivate night service.
(see handset operating instruc-
tions)
… the answering machine
says "PIN is incorrect" during
remote control?
The system PIN entered is incor-
rect or still set to 0000.
Enter the system PIN again or
set a PIN that is different from
0000
(see handset operating instruc-
tions).
… the answering machine
does not record any messages
or has automatically switched
over to 'announce only'?
Its memory is full. Delete old messages
Play back new messages and
delete.
(see handset operating instruc-
tions)
… there are no incoming
calls?
"Constant" call forwarding is acti-
vated.
The MSN has not been assigned
to the internal user.
The "internal" authorisation is
set.
Deactivate "Constant" call for-
warding.
Determine the receive MSN.
Change the authorisation.
(see handset operating instruc-
tions)
… the telephone also rings for
fax-PC calls?
The phone number is in the
phone number list on the base.
Delete the corresponding
phone number (MSN) in the
list.
(see handset operating instruc-
tions)