Regular maintenance, Accessing the engine, Fuel filter replacement – Simplicity 14HP User Manual

Page 23: Oil filter, Check change air, Inspect replace spark plugs

Advertising
background image

Regular Maintenance

Engine

ACCESSING THE ENGINE

To gain access to the angina, unhook the rubber straps

(Figure 18) and tip the hood forward.

NOTE: For engine service item locations see Figure

20 for models with Briggs Stratton engines and

Figure 19 for models with Kohler engines

FUEL FILTER REPLACEMENT

The fuel filter (E, Figures 19 and 20) is located in the fuel

line between the fuel tank and the carburetor.

If filter is dirty or clogged, replace as follows:

1. Disconnect the negative battery cable

2. Place a container below the filter to catch spilled fuel.

3. Using a pliers, open and slide hose clamps from fuel

filter.

4. Remove hoses from filter.

5. Install new filter in proper flow direction in fuel line.

6. Secure with hose clamps.

7. Reconnect the negative battery cable when finished.

OIL FILTER

Refer to engine manual for specific oil and filter recom-

mendations and oil draining procedures.

CHECK CHANGE AIR

Refer to the engine manual for specific air filter service
procedures.

INSPECT

REPLACE SPARK PLUGS

Refer to the engine manual for specific spark plug
replacement procedures.

Figure 19. Engine Compartment

16 HP Kohler Single Cylinder Engine

A. Battery

D Oil Fill/Dipstick

Oil Filter

E. Fuel Filter (Not Shown

C. Air Filter

F. Throttle/Choke Cable

Figure 20. Engine Compartment’

14 HP, 16 HP, 18 HP Briggs &Stratton

Twin Cylinder Engine

A. Battery

E. Fuel Filter

B. Oil Filter

F. Throttle Cable

C. Air Filter

G. Choke Cable

D Oil Fill/Dipstick

1 7

Advertising