Stanton S-650 MK II - Manual (Page 7)

NAMES AND FUNCTIONS
LCD
(24) ~(27)TRACK, MINUTE, SECOND and FRAME
Display
These displays indicate information for the CD’s
current position and time.
(28) BAR Indicator
These ten indicators provide a visual display of the
approximate position of the pickup within the current
track.
(29) ELAPSED Indicator
It indicates that the time shown for the display is the
elapsed time.
(30) CONTINU Indicator
When the indicator lights, the function will cause the
unit to play continuously.
(31) SINGLE Indicator
When the indicator lights, playback will stop at the
beginning of the next track.
(32) REMAIN Indicator
It indicates that the time shown on the display is the
remaining time of playing track.
(33) PITCH DISPLAY
Shows the current percentage of pitch change, pitch
range is selectable from +/-8%, 12%, or 16%.
PREPARATIONS
1. Checking the Contents
Check that the carton contains the following items:
1) Main unit
2) Control unit
3) Operating instruction
4) Pair of RCA pin cord.
5) Control cords
2. Installing the Unit
Mount the unit into your console or rack with 19" EIA rack rails.
CAUTION:
The player will work normally when the main unit is
mounted with the front panel at within 15 degrees of
the vertical plane. If the unit is tilted excessively,
discs may not be loaded or unloaded properly.
The control panel's LCD’s are designed to be clearly
visible within the angles shown in Figure 2. Mount the
control unit so that the visual angle is within this
range.
Max.
15°
Main unit
45°
5°
Control
panel Button
Figure 1 Figure 2
. Connections
1) Turn off the POWER switch.
2) Connect the RCA pin cord to the input on your mixer.
3) Connect the control cords to the REMOTE connector on the main unit.
CAUTION:
• Be sure to use the supplied control cords. Using another type of cable may result in damage.
• Be sure the power is off when connecting the control cords. Otherwise the units may not work properly.
6
24 25 26 27 28 29 30 31 32 33