Seiko H023 User Manual
Page 22
English
22
NOTES ON OPERATING THE WATCH
*1 • The day of the week is automatically set once the year, month and date are set.
• When the time is set in the 24-hour display, the world time and alarm time will also
be shown in the 24-hour display.
*2 • The digits,other than seconds and “12H”/“24H”, advance quickly if Button D is kept
pressed.
• When the seconds read any number between “30” and “59” and Button D is
pressed, one minute is added.
• When setting the hours in the 12-hour display, check that AM/PM is properly set. An
AM indicator in the morning, or a PM indicator from the afternoon is shown when the
12-hour display is selected. In the 24-hour display, there is no such indicator.
*3
The hands move counterclockwise by pressing Button A and clockwise by pressing
Button D.They move quickly if the respective buttons are kept pressed.
*4
If the watch is left untouched in the TIME/CALENDAR SETTING display with an item
flashing, it will automatically return to the TIME/CALENDAR mode in 2 to 3 minutes.
*5
The hourly time signal will not ring while alarm is sounding.
*6
Daylight saving time is a system adopted by some countries to make the best use
of daylight during a certain period in summer. Under this system the time is advanced
an hour.
*7
The use of daylight saving time may change in some areas or countries when it is so
decided by the countries concerned.