Seiko H023 - Manual (Page 26)

English
26
NECESSARY PROCEDURES AFTER CHANGING THE BATTERY
* After the battery is replaced with a new one , or in case an abnormal display (Broken
numerals or letters etc.) appear, follow the procedures below to reset the IC.
* Selected cities in TIME/CALENDAR, WORLD TIME, and ALARM modes are all reset to “GREENWICH”
by pressing the four buttons.
➪
Set the analogue time and digital time/
calendar.
(See “TIME/CALENDAR SETTING” on page 8)
B
A
C
D
➡
➡
➡
Press and hold the four buttons for 2 to 3
seconds at the same time.
➪
* All digital indicators are reset to show
"GREE", " 1" , " MON" and "AM 12:00 00"
in the TIME/CALENDAR mode.
All digital indicators disappear at
once and the display shown at left
appears when the buttons are re-
leased.
➡