Sony Ericsson P910i - Manual (Page 43)

Phone 43
This is the Internet version of the user’s guide. © Print only for private use.
• 2 Send Busy – Reject the call. The calling party will hear a
busy tone and the call will be logged as a rejected call.
• 3 Mute – Silence the ring signal. The calling party will not
notice that you have silenced the call. The call will be logged
as a missed call.
If a large picture of the caller fills the screen, you can press
or use the Jog Dial to access the menu with the options
above.
Options during or directly after a call
Use the Jog Dial to change the phone volume during a call.
Press to get a list of call handling options. The list will
vary depending on the situation. Options that concern two or
more active calls are described in ‘Handling two or more calls’
on page 45.
• End call – End the active call.
• New call/Hold call/Retrieve call – Put the active call on hold /
retrieve the held call. This is useful if you want to make a
new call during a call.
• Add to contacts – Create a new Contacts entry if the phone
number of the active call is known, and not already stored in
Contacts.
• Show contact – Display the entry in Contacts, if any, that
corresponds to the phone number of the active call.
• Transfer sound – Transfer the call to a Bluetooth wireless
technology headset.
• Turn On/Off tones – You can send DTMF tones with the
keypad, ‘Controlling tone-based services’ on page 49.
• Microphone mute On/Off – Turn the microphone on or off.
• Copy number – Copy a phone number to the clipboard.
• Paste number – Paste a copied number to be used for the next
call.
• Speakerphone On/Off – You can use the P910i as a
speakerphone. See ‘Speakerphone’ on page 48.
• Applications – Open another application, and, for example,
paste a copied phone number into a Jotter entry.
Press and hold to mute the microphone during a call.
Shortly press again to reactivate the microphone.
Call handling with the flip open
You use the stylus and the virtual keypad to handle calls with the
flip open.
Outgoing calls
To make a call
1. Select in the application picker. The Speed dial view is
opened.