Sherwood BDP-6003 - Manual (Page 31)

Setup menu
30
PCM Down Sampling
When the Amplifier connected to the player is not 96KHz compatible, you can select the ‘OFF’, then
96KHz signals will be down converted to 48KHz.
Set ‘PCM Down Sampling’ to ON or OFF for this effect.
1
With the unit in Stop mode, press the HOME
MENU button.
2
Press the œ √ buttons to select Setup, then
press the OK button.
3 Press the † button to select Audio setup, then
press the √ button. Audio setup menu will be
displayed.
4
Press the …† buttons to select ‘PCM Down
Sampling’ then press the √ button.
• On : Signals are converted to 48KHz.
• Off : When the Amplifier connected to the Blu-
ray disc player is 96KHz compatible,
signals are output as 96KHz.
5
Press the …† buttons to select the desired item,
then press the OK button to confirm your choice.
Digital Output(S/PDIF)
Digital Output(HDMI)
Speaker Setup
PCM Down Sampling
Dynamic Compression
On
Off
✔
OK Select RETURN Back …†œ √ Move
Digital Output(S/PDIF)
Digital Output(HDMI)
Speaker Setup
PCM Down Sampling
Dynamic Compression
OK Select RETURN Back …†œ √ Move
√
BDP-6003-English 2008.12.5 6:19 PM ˘ ` 30