Sherwood BDP-6003 - Manual (Page 39)

Setup menu
38
5
The system update gets started.
6
When the file download is done, you will see a
window that allows you to update firmware. To
perform the firmware update, press the œ √
buttons to select ‘Yes’ and then press the OK
button.
• You will see a message about the upgrade
process.
• If you do not want to update firmware, select
‘No’ and then press the OK button.
• When the Network upgrade is done, check the
firmware details in the Firmware Info menu.
• Do not turn off the player during the System
Upgrade Otherwise, the player may not work
properly.
• When the network setting is not correct, upgrade
will be not operated properly.
System Info
Network Settings
Default Reset
Slideshow Interval
Local Storage
DHCP, IP, DNS...
Network Update
OK Select RETURN Back …†œ √ Move
Downloading update data...
Please, do not turn off the power.
System Info
Network Settings
Default Reset
Slideshow Interval
Local Storage
DHCP, IP, DNS...
Network Update
OK Select RETURN Back …†œ √ Move
Update Firmware download is finished.
Do you want to update Firmware?
System Info
Network Settings
Default Reset
Slideshow Interval
Local Storage
DHCP, IP, DNS...
Network Update
OK Select RETURN Back …†œ √ Move
Firmware Update.
Now, Processing...
Please, do not turn off the power.
Cancel
Start Cancel
BDP-6003-English 2008.12.5 6:19 PM ˘ ` 38