Stanton C.400 - Manual (Page 5)

PREPARATIONS
1. Checking the Contents
Check that the carton contains the following items:
1) Main unit 2) Pair of RCA cables 3) Operating instructions (this booklet) 4) Power cord
NAMES AND FUNCTIONS
Main Unit
(1) DIGITAL OUT SOCKET
Coaxial (S/P DIF) digital output for use with audio
devices equipped with coaxial (S/P DIF) digital input
such as digital mixing consoles and computer audio
cards.
(3) AC IN
(2) AUDIO OUT
The audio signals from each player are output from
these jacks.
Plug in the power supply cable here.
Main Unit
(3)~(6)Track, Minute, Second and Frame Displays
These displays indicate information for the CD’s current
position and time.
(7)BAR Indicator
These ten indicators provide a visual display of the
approximate position of the pickup within the current track.
(8)TOTAL/ REMAIN Indicator
When “TOTAL” and “REMAIN” are indicated in the LCD
DISPLAY the TIME DESCRIBED in the LCD will define
the total disc remaining time.
(9) SINGLE Indicator
When SINGLE lights off, the CD player will play tracks
continuously.
(10) PROG.
Indicator
The PROG indicator lights when program mode is set.
(11) PITCH DISPLAY
This shows the BPM change range (the BPM changes
within a range of +/-16%).
(1) OPEN/CLOSE
Press this button to open and close the disc holder. The
main unit also includes OPEN/CLOSE buttons. The disc
holder cannot be opened during playback, so stop
playback before pressing the button.
(2) TIME (Time Button)
Press this button to switch the time display among the
elapsed time and remaining time and total remaining time
of the disc.
(3) LCD
(4) REPEAT
To place the unit into REPEAT mode press this button.
Once the unit is in REPEAT mode the current track will
play until the button is pressed again.
(5) PITCH +/- BUTTON
The CD speeds up while this button is pressed.
Release the button to return to the original BPM.
The CD slows down while this button is pressed.
Release the button to return to the original BPM.
(6) PITCH RANGE
Choose from pitch percentages of 4%, 8% and 16%.
(7) PITCH LOCK
Use these buttons to enable or disable BPM adjustment
with the pitch sliders. BPM adjustment with the pitch
sliders is disabled when the PITCH LED lights.
(8) PITCH SLIDER
Use the slider to adjust the CD pitch. Slide up to
decrease the pitch, down to increase the pitch.
(9) PLAY/PAUSE
Use this button to start playback. Press once to start
playback, once again to set the pause mode, and once
more to resume playback.
(10) SGL/CTN (Single/Continuous Button)
Press this button to switch between single and
continuous play modes. SINGLE mode is indicated by
the SINGLE indicator on the LCD.
(11)CUE (Cue Button)
Press the CUE button during playback to return to the
position at which playback started.
(12)+10
Use the button to skip ahead 10 tracks.
(13)
Use these buttons to go back to the beginning of the
current track or select a previous track for playing.
(14) ,(15)
Press these buttons to perform the scan function during
pause mode or during play mode.
(16)
Use these buttons to skip to the next CD track.
(17) POWER (Power ON/OFF Switch
When the POWER switch is pressed, the power turns
on.
(18) JOG (JOG dial)
When the dial is turned during CD pause, the point at
which the sound is being produced mover by a number
of frames corresponding to the number of clicks.
Clockwise moves the point forward, counterclockwise
moves the point backward.
(19) DISC HOLDER
Place the discs in the holder. Press the OPEN/CLOSE
button to open and close the disc holder.
LCD