Stanton C.400 - Manual (Page 8)

OPERATIONS
8. Scanning (Fast forward/Fast backward)
Scanning is a function for moving quickly forward or backward in the track when the or button is pressed.
The scanning speed depends on how long you hold the button.
Press and hold the
or to begin scanning. The disc moves rapidly forward or backward and the sound is
played. The current scan point is indicated on the LCD.
Press and hold the to scan in the forward scanning, to scan in the reverse scanning.
9. Time
display
Press the TIME button to select the time display mode:
Elapsed time of a track.
Remaining time of a track.
Total remaining time of the disc.
TIME
TIME TIME
Total remaining time of the disc
Figure 9-1
10. Matching the Beats Per Minute (BPM )
There are three tools available for matching the BPM of the two CDs:
Use the pitch slider to adjust the BPM statically.
Use the PITCH BEND buttons to change the BPM temporarily.
Use the JOG WHEEL to change the BPM temporarily.
1) Pitch Slider
To adjust the BPM by sliding the pitch slider up or down, you must first press the PITCH button to turn on the
Slide the pitch slider up to decrease BPM, or down to increase BPM. The adjustment range is switchable from +/-
4%,+/-8% to +/-16%.
2) Pitch Bending
The BPM increases or decreases respectively while the PITCH BEND+ or PITCH BEND- button is pressed.
The BPM increase depends on how long you hold the button. If you hold the button for about 1/2 second, the BPM will
go either to +16% for PITCH BEND+ or -16% for PITCH BEND-. If you tap the button, the BPM will only change a little
so you can change the beat slightly without audible changes in the music.
The CD will return to the tempo indicated by the Pitch slider when you let go if the PITCH BEND+ or -.
PITCH.