Samsung SV-661B - Manual (Page 30)

Bass adjustments you make are saved for each source.
Image menu:
The following settings allow you to adjust the image.
Display Audio Image Controls Language Status
> >
Keystone
Overscan
Auto image on
Resize on
on
Manual sync
Manual tracking
Horizontal position
Vertical position
Keystone
Use this option help to keep the image square as the angle of projection is
changed. To adjust the keystone, highlight Keystone, and then click the left or
right mouse button. This option is available for computer sources displaying
their native resolutions only, SVGA 800 x 600 for the iL2120 and XGA 1024 x
768 for the iL2220.
Overscan
Use this to crop all the edges of the image to remove noise that is generated
on the edges by your source. This option is available for video sources only.
Note: Some screen savers interfere with the operation of Auto Image. If you
are experiencing problems, try turning your screen saver off, then
turning Auto Image off and on again.
Auto Image
The projector automatically adjusts tracking, signal synchronization, and
vertical and horizontal position for most analog computers (Auto Image does
not apply to video sources or digital computer sources). If you want to adjust
these features manually, you must turn off Auto Image first by highlighting
Auto Image
in the Image menu and clicking the left or right navigation
button to select off.
Note: When you connect an HDTV source, the projector automatically
displays the image in 16 x 9 format.
20 iL2120 IBM Value Data/Video Projector, iL2220 Conference Room Data/Video Projector: User’s Guide