Sanyo scp8300 - Manual (Page 102)

Making a 10-4 Call (Group Call)
You can make a 10-4 call to all members in a Group entry, which
you have in your 10-4 List. You can communicate with up to five
members at a time.
1. Press (left softkey) or press to access the 10-4 List.
2. Press (left softkey), highlight the list from which you want
to make a Group call (Company Grps., Personal Grps., or
Outgoing), and press
.
3. Highlight the group you want to call, and press and hold
to place the call and take the floor. (You will see
10-4 calling... and Connecting... followed by “You have floor.”
Continue with the 10-4 call as described previously.)
ᮣ To make a 10-4 call to a group member, select your desired
group, highlight your desired group member, and press and
hold .
ᮣ The phone beeps if you press the 10-4 button when another
contact has the floor.
4. When the call is finished, press .
Tip: You can also make a Group Call after checking the group member.
Press to display group members, highlight <Call Group> and press
and hold during step 3 above.
Go to
10-4
95
8300 Bell_EN_3b.qxd 05.10.25 16:45 Page 95