Socket Mobile E500 - Manual (Page 20)

STEP 2: Install the Software
1. Go Wi-Fi! E300/E500 If you previously installed an older version of
Socket WLAN card drivers on your Pocket PC, you must completely
remove the old drivers by doing the following:
• Make sure the WLAN card is not in the Pocket PC.
• Tap Start | Settings | System tab | Remove Programs.
• Select the WLAN card drivers and tap Remove.
• Soft reset the Pocket PC by pressing the reset button.
2. Make an active connection between your device and a host PC. Use
ActiveSync and a serial/USB/Ethernet connection cable or cradle.
ActiveSync should report Connected, and the ActiveSync icon should
turn green.
3. Insert the installation CD into your host PC.
4. Use My Computer or Windows Explorer to access your CD-ROM drive.
In the CD, click on WTMESetup.exe.
20