Sunbeam JS7300 - Manual (Page 19)

19
Disassembling your Sunbeam
Juice Life
1. Turn the power ‘Off ’ at the power outlet
and unplug the cord.
2. Separate the entire juicer body from the
motor body. Turn the locking nut on the
motor body to the left or anti-clockwise,
figure 12.
3. Release the juicer end nozzle from the
strainer cap, by turning to the right or
clockwise.
4. Release the strainer cap by turning
clockwise, figure 13.
5. Remove the juice strainer (blank strainer),
figure 14.
Note: If the strainer cap is too difficult to
release because food is compacted in it,
then separate the juicer body from the motor,
remove the end nozzle and get a good grip on
the strainer cap with a non-slip rubber glove.
Turn it to the right or clockwise.
6. Removing the juicing screw, figure 15.