Sony DPP-FP35 - Manual (Page 21)

21 GB
Printing from a PC
6
Check “I accept the terms of the
license agreement” and click
“Next”.
If you check “I do not accept the terms
of the license agreement”, you cannot
proceed to the next step.
The “Ready to install the program”
dialog box is displayed.
7
Click “Install”.
The “Printer connection” dialog box is
displayed.
8
Connect the printer to the AC
power source (page 16).
9
Press 1 (on/standby) switch to
turn on the printer (page 17).
The 1 (on/standby) indicator of the
printer lights in yellow green.
10
Click “Next”.
11
Connect the USB connectors of
the printer and your computer.
The printer automatically enters the
PC mode and the printer setup will
start automatically.
When the printer setup is complete,
the “InstallShield Wizard Complete”
dialog box is displayed.
Note
In case you use commercially available
USB cable, use a B-type USB cable shorter
than 3m in length.
12
Click “Finish”.
The installation of the printer driver is
complete. When you are prompted to
restart your computer, restart the
computer.
13
• To finish installation, click
“Complete” and remove the
CD-ROM from your computer
and keep it for future use.
• To continue to install the
Picture Motion Browser
software, click “Installing the
Picture Motion Browser” and
follow the procedures on page
23.
To USB
connector
(B-TYPE)
Windows PC
To USB
connector
Continued