Summit SPW1200P - Manual (Page 14)

English
13
Selecting Wash/Rinse Temperature:
When you turn the power "ON", the initial temperature is set at
"Hot/Cold" position. You will see the red light lit up at this position.
For your convenience, there are three temperature options you can
select from based on the fabric type: Hot/Cold, Warm/Cold and
Cold/Cold.
If you want to select your desired option at this time, follow the procedure below.
1. Keep pressing left arrow ( ) on select button until the red light of the "Temp
Select" button is lit up.
2. Once you are at this setting, use down arrow ( ) to select the proper
temperature option for your clothes.
Always refer to the label on the garment for proper temperature that is
recommended by garment manufacturers. See the reference chart below to select
proper temperature for the fabrics.
WASH/RINSE TYPES OF FABRICS
Cold/Cold Non-colors Fabrics, lingerie
with light or normal soil
clothes & special care fabrics
Warm/Cold Delicate & colors Fabrics
Hot/Cold Sturdy whites & colors
Fabrics such as work & play
clothes, soiled fabrics
Start/Pause Button:
After selecting your options and closing the washer door properly, you need to
press the "Start/Pause" button to start the washer.
If you want to pause during the cycle, simply press "Start/Pause" button. This will
stop the activity during the cycle until you press this button again to resume the
cycle.
START
PAUSE