Setting the pc – Samsung BN68-00990V-03 User Manual
Page 27
English - 27
1
Press the MENU (
) button to display the menu.
2
Press the … or † button to select Setup, then press the ENTER (
) button.
3
Press the … or † button to select PC, then press the ENTER (
) button.
4
Select the required option by pressing the … or † button, then press the
ENTER (
) button.
Available options: Image Lock, Position, Auto Adjustment, Image Reset
5
When you are satisfied with your setting, press the ENTER (
) button.
6
Press the EXIT button to exit.
◆ Image Lock: Coarse/Fine
The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust the frequency
as best as possible (coarse) and Fine-tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned
on the center of screen.
1
Press the … or † button to select Coarse or Fine, then press the
ENTER (
) button.
2
Press the œ or √ button to adjust the screen quality, vertical stripes may
appear or the picture may be blurry. Press the ENTER (
) button.
◆ Position:
Adjust the PC’s screen positioning if it does not fit the TV screen.
1
Adjust the position by pressing the …/†/œ/√ button.
2
Press the ENTER (
) button.
◆ Auto Adjustment:
Auto adjustment allows the PC screen of set to self-adjust to the incoming
PC video signal.
The values of fine, coarse and position are adjusted automatically.
◆ Image Reset:
You can replace all image settings with the factory default values.
➢
You can select these options simply by pressing the PC button on the
remote control.
➢
Preset to the PC mode by pressing the SOURCE (
) button.
Setting the PC
Setup
Move
Enter
Return
Plug & Play
Language
: English
Time
Game Mode
: Off
Blue Screen
: Off
Melody
: Off
PC
More
TV
PC
Move
Enter
Return
Image Lock
Position
Auto Adjustment
Image Reset
TV
Image Lock
Move
Enter
Return
Coarse
50
Fine
0
TV
Position
Move
Enter
Return
TV
Image Reset has completed.
Return
Auto Adjustment in progress
Please wait
e)
a
BN68-00990V-03Eng_0824 8/26/06 4:25 PM Page 27