Samsung BN68-00990V-03 - Manual (Page 30)

English - 30
1 After switching the mode to WISELINK, select a memory device that you
have installed. (Refer to page 29)
2 Press the œ or √ button to select Photo, then press the ENTER ( )
button. JPEG files and existing folders are displayed.
3 Press the …/†/œ/√ buttons to select a file, then press the ENTER ( )
button.
➢
Pressing the button over a photo icon displays the currently selected
photo in full screen. However, JPEG files smaller than 640x480 pixels
are zoomed-in at 4 times their original size.
(e.g. If a photo’s original size is 200x200 pixels
It is displayed at
800x800 pixels)
➢
Press the INFO ( ) button and select View to view a photo image at
its original size.
➢
Pressing the button over a folder icon shows the JPEG files included in
the folder.
➢
While a full screen is displayed, œ/√ buttons will let you see another
photo image in the same folder.
➢
Press the PLAY/PAUSE ( ) button when a Photo icon is selected to
start a Slide Show.
To exit WISELINK mode, press the WISELINK button on the remote control.
➢
Moving to a photo may take a few seconds because the file needs to
be loaded. At this point, the
icon will appear.
➢
This menu shows only the files whose extension is jpeg (or jpg). Files
with other formats such as gif or tiff will not be displayed.
➢
Fifteen thumbnail photos are displayed per page.
➢
The thumbnails are numbered from left to right and from top to bottom,
from 1 to 15.
➢
Folders are displayed first and they are followed by all JPEG files in the
current folder. The folders and JPEG files are sorted in alphabetical
order.
➢
If the photo is displayed in full screen, you can zoom in and out or
rotate the photo on the screen. (Refer to pages 34~35)
➢
It takes a while to show JPEG files as thumbnail images.
➢
WISELINK for this product supports JPEG files up to 8K x 8K pixels.
For progressive JPEG files or files whose size exceeds 8MB, the photo
will be displayed as a thumbnail only. When trying to view a progressive
JPEG file, the “Not supported mode” message will appear.
When trying to view a file exceeding 8MB, the “This file is too
large to decode
” message will appear.
Using the Photo (JPEG) List
You can play back the JPEG files saved on a memory device in various ways.
Move Enter Return
Move Enter Photo Menu Return
219x171
6 KBytes
May 05,2006
3/130
: Folder icon
: Photo icon
: Move to the previous folder
stage icon
continued...
œœ 1/10 Page √√
➢
Press the WISELINK button on the remote control to turn on the WISELINK
mode.
BN68-00990V-03Eng_0824 8/26/06 4:25 PM Page 30