Sony TA-FB920R - Manual (Page 9)

Basic Operations
9 GB
Basic Operations
Recording
4 Prepare the recording component for recording, then start
recording.
5 Start playing the programme source.
Set INPUT SELECTOR to
Source connected to:
—TAPE1/DAT
—TAPE2/MD
z
You can record the same
source on two recording
components at the same
time
z You can monitor the
recorded sound (Tape
Monitor function)
You can monitor the
recorded sound if the tape
deck you are recording on
has separate playback and
recording heads.
To monitor the sound, set
TAPE MONITOR to TAPE1
or TAPE2.
Note that on the
TA-FB820R/FB720R, you
can monitor the only sound
being recorded from the
TAPE1/DAT jacks.
1 Press U to turn on the amplifier.
2 Turn on the programme source you want to record.
3 Select the programme source that you want to record by
turning INPUT SELECTOR.
The indicator for the programme source lights up.
TAPE1/DAT
TAPE2/MD
To record a
PHONO
TUNER
CD
Radio broadcast
Compact disc
Record
AUX Source connected to AUX
TA-FB920R TA-FB820R/FB720R
1 3
PROTECTION
U
PHONES
SPEAKERS A • • • • OFF
A +B
–10 +10
TONE
SUBSONIC
EON LINK
INPUT SELECTOR VOLUME
SOURCE DIRECT 0 10 B
g
SOURCE • • • TAPE1 TAPE2
BASS 0 •
• • –10 +10
TREBLE 0 •
• • LEFT RIGHT
BALANCE
•
• •
TAPE MONITOR
TAPE1/DAT EON LINK CD TUNER PHONO AUX TAPE2/MD
LOUDNESS Ø ON ø OFF Ø ON ø OFF
1 3
PROTECTION
U
PHONES
SPEAKERS A 0 BASS
• OFF
A +B
–10 +10
TONE
SUBSONIC
INPUT SELECTOR VOLUME
SOURCE DIRECT
EON LINK
0 10 Ø ON ø OFF LOUDNESS Ø ON ø OFF
B
g
SOURCE TAPE1
0 TREBLE
•
–10 +10
• BALANCE
TAPE MONITOR
CD
TUNER AUX
TAPE2/MD
TAPE1/DAT
PHONO
•
LEFT RIGHT