SIGMA SD9 - Manual (Page 65)

CHANGING THE QUICK PREVIEW DURATION
TO CHANGE PREVIEW DURATION
1
Make sure the camera is turned on.
2
Press the
MENU
button on the back of
the camera to display the Camera Set-up Menu.
(See P.96)
3
Use the arrows on the 4-way
controller to select “Quick Preview”.
4
Press the arrow or OK to open
sub-menu.
5
Use the arrows on the 4-way
controller to select a duration.
6
Press the arrow or
OK
to apply the
setting or the arrow or CANCEL
to close sub-menu without making any changes.
TIP
·
To manually turn off the Quick Preview image, press the
CANCEL
button
or the shutter button half-way.
·
While the Quick Preview image is being displayed, the OK button can
be used as a shortcut key to temporarily toggle the over-exposure warning
overlay on or off, or to mark, lock or rotate the image. (See P.90 to set OK key
shortcut.)
·
It will not be possible to zoom in to the preview image, use the Modify Menu, or
change to another image while the Quick Preview is up.
·
Pressing the
VIEW
button while the Quick Preview image is up
enables all image review features and overrides the Quick Preview time-out.
64