SIGMA SD9 User Manual
Page 95
SHOWING A SLIDESHOW
TO STOP/PAUSE A SLIDESHOW
Press
CANCEL
to stop a slideshow and return to the previous view
(Single-Image, Contact Sheet, etc.).
· The image that the slideshow stops on will become the currently selected image.
TO RESUME A STOPPED SLIDESHOW
1
Press
MOD
to display the Modification
Menu.
2
Use the
arrows on the 4-way
controller to select the Slideshow Menu.
3
If not already selected, use the
arrows on the 4-way controller to select
“Resume show”.
4
Press
OK
to close the Modification Menu
and resume the slideshow.
· The slideshow will resume with the next image
in the sequence following the one the slideshow
was stopped on.
TIP
·
It will not be possible to resume a slideshow that has stopped automatically after
the last image. (See P.95 for setting slideshow repetition.)
·
Pressing
MENU ,
VIEW or the shutter release will also stop a
slideshow, however, it will not be possible to resume a slideshow stopped in this
manner.
94