Sanyo DC-MX41i - Manual (Page 16)

14
4. T ouch /ENTER to enter the selected menu.
5. T ouch or to search the current content in the each desired menu.
6. To return to the previous menu, t ouch /MENU.
7. To resume playback, press the iPod/MEM/C-ADJ. button once again, the unit will return to iPod mode.
Charging the iPod Player battery through the main unit:
1. If the iPod player is connected to the unit. The iPod will be charged automatically.
2. You can charge the iPod Player in STANDBY MODE or POWER ON mode.
Note : 1. The iPod Player battery is 80-percent charged in about one hour, and fully charged in about a few hours. If
you charge it while playing music, it may take longer.
2. It is not better to charge under the TUNER mode. It may interfere the reception.
Note:
1. In any time, you can control the iPod player on the main unit, remote control or iPod player itself while the unit
in the "iPod" or "iPod MENU" mode.
2. In any time, the iPod player must be fixed well under in the STANDBY mode to avoid the unit and iPod player
were damaged.
3. During the unit in iPod mode, if the video function of the iPod cannot work properly. Update the latest version of the
iPod video function from the apple web-site.
F22 F23
AUX IN PLAY
1. Use a cable with RCA jack to connect external audio source (DVD player, Mini Disc player, Cassette Deck etc.) to the
LINE IN jack on the right of the unit.
2. Touch FUNC on the unit or press the FUNCTION button on the remote control repeatedly until the "AUX” appears on
the display.
3. Turn your auxiliary source "ON" and operate it as usual. The sound from the auxiliary source will be heard through
the speakers of the unit.
Note: Aux in cable not included.
TO SET SLEEP FUNCTION
1. If you want to fall asleep with music, press the SLEEP button.(F24)
2. Press SLEEP button repeatedly to change and select from 90 to 80, 70, 60, 50, 40, 30, 20, 10 minutes. You
may select the TUNER, CD, USB, CARD or IPOD mode in sleep function.
3. After the unit plays for your selected time, it will shut down automatically. While the SLEEP function is
activated, press SLEEP button once and the remained sleep time will be shown. Press SLEEP button
again to select another sleep time.
F24
EQ shows the present sound tone.
When you t
ouch EQ or press the EQ button on the remote control, the sound tone changes as below:
EQ CONTROL