Sanyo DC-MX41i - Manual (Page 5)

3
ASSEMBLY DRAWING OF UNIT AND SPEAKER
1 Fixing the whole set of the unit on the wall
Parallel the two nails that fix into the wall, the distance of them should keep
in 300mm.
Note : The size of the nail : 3.5*25BA.
Parallel the two nails that fix into the wall, the distance of them should keep in 84mm.
Note : The size of the nail : 3.5*25BA.
84 mm
300 mm
Press down and push the stand panel of the buckle A and B on the rear of the
each speaker, and then each stand of the speaker will remove from them.
Press down and push the stand panel of the buckle C and D on the rear
of the main unit, and then the stand of the main unit will remove from it.
Note: When wall-mounting the set of product in line, suggest keeping at least 50mm distance from the main unit to
the speakers to achieve better stereo effect and to ensure the slide CD door with prefect movement.
50 mm 50 mm