Sony HT-DDW880 - Manual (Page 46)

46 GB
E:\SEM_Janet\Year2006\Revision_Data\Revision3_HT-
DDW880\J9060043_2662263321DDW880_GB\2662263321\GB05AMP_HT-DDW880-CEL.fm masterpage: Left
HT-DDW880
2-662-263-32 (2)
x DUAL (Digital broadcast
language selection)
Lets you select the language you want to listen
to during digital broadcast. This feature only
functions for Dolby Digital sources.
• DUAL M/S (Main/Sub)
Sound of the main language will be output
through the front left speaker and sound of
the sub language will be output through the
front right speaker simultaneously.
• DUAL M (Main)
Sound of the main language will be output.
• DUAL S (Sub)
Sound of the sub language will be output.
• DUAL M+S (Main + Sub)
Mixed sound of both the main and sub
languages will be output.
x A.V. SYNC. (A/V Sync)
• A.V.SYNC. Y (Yes) (Delay time: 68 ms)
The audio output is delayed so that the time
gap between the audio output and visual
display is minimized.
• A.V.SYNC. N (No) (Delay time: 0 ms)
The audio output is not delayed.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projector.
• This parameter is valid only when you use a sound
field selected with the 2CH or A.F.D. buttons.
• This parameter is not valid when
– PCM 96 kHz, DTS 96/24 or DTS 2048 signals
are input.
– the receiver performing DTS-ES Matrix 6.1
decoding.
– MULTI CH IN function is selected.
x NAME IN (Naming inputs)
Lets you set the name of inputs. For details, see
“Naming inputs” (page 63).
Settings for the video
(VIDEO menu)
You can use the VIDEO menu to reassign the
component video input to another input and to
name inputs.
Select “6-VIDEO” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 39) and
“Overview of the menus” (page 40).
VIDEO menu parameters
x COMP. V. A. (Component video
assign)
Lets you reassign the component video input
to another input. For details, see “Watching
component images from other inputs” (page
61).
x HDMI A. (HDMI assign)*
Lets you reassign the HDMI input to another
input. For details, see “Watching HDMI
images from other inputs” (page 62).
x NAME IN (Naming inputs)
Lets you set the name of inputs. For details, see
“Naming inputs” (page 63).
* Except for models of area code E51.
GB01COV_HT-DDW880-CEL.book Page 46 Wednesday, January 18, 2006 9:10 AM