Southbend SB1017 - Manual (Page 53)

For Machines Mfg. Since 8/09 Model SB1017
-51-
P A R T S
Machine Labels
The safety labels provided with your machine are used to make the operator aware of the
machine hazards and ways to prevent injury. The owner of this machine MUST maintain the
original location and readability of these safety labels. If any label is removed or becomes
unreadable, REPLACE that label before using the machine again. Contact South Bend Lathe Co. at
(360) 734-1540 or www.southbendlathe.com to order new labels.
301
302
303
304
305 306 307
308
309 310
311
312
313
REF PART # DESCRIPTION REF PART # DESCRIPTION
301 PSB1017301 MACHINE ID LABEL 308 PSBLABEL01HS READ MANUAL LABEL
302 PSB1017302 MODEL NUMBER LABEL 309 PSBLABEL13VS DOOR CLOSED WARNING LABEL
303 PSBLABEL15S ELECTRICITY LABEL 310 PSBPAINT01 SB LT GRAY TOUCH-UP PAINT
304 PSB1017304 BELT COVER WARNING LABEL 311 PSBPAINT03 SB DK BLUE TOUCH-UP PAINT
305 PSBLABEL02HS DISCONNECT WARNING LABEL 312 SB1320 SOUTH BEND NAMEPLATE 125MM
306 PSB1017306 CUTTING HAZARD WARNING LABEL 313 PSBPAINT02 SB LT BLUE TOUCH-UP PAINT
307 PSBLABEL04HS EYE INJURY WARNING LABEL