SMC Networks ElliteConnect 2.4GHz/5GHz - Manual (Page 226)

Command Line Interface
7-56
Command Mode
Global Configuration
Command Usage
• Ethernet and WDS user names and passwords must be set
before enabling the 802.1x supplicant feature for the
specified port.
• The access point currently only supports EAP-MD5 CHAP
for 802.1x supplicant authentication.
Example
address filter default
This command sets filtering to allow or deny listed MAC
addresses.
Syntax
address filter default <allowed | denied>
• allowed - Only MAC addresses entered as “denied” in the
address filtering table are denied.
• denied - Only MAC addresses entered as “allowed” in the
address filtering table are allowed.
Default
allowed
Command Mode
Global Configuration
AP(config)#802.1x supplicant wds_user 1 David
AP(config)#802.1x supplicant wds_password 1 ABC
AP(config)#802.1x supplicant wds 1
AP(config)#