Salton, Inc SD8PC3D - Manual (Page 6)

ADDITIONAL BATCHES
For additional batches unplug unit. Make sure the Popping Chamber is
empty. Carefully remove excess popcorn or left over unpopped kernels.
Then repeat steps 1 through 4. Note: When popping more than two or
three batches of corn, allow popper to cool down for at least 10 minutes.
USER MAINTENANCE INSTRUCTIONS
This appliance requires little maintenance. It contains no user serviceable
parts. Do not try to repair it yourself. Any servicing requiring disassembly
other than cleaning must be performed by a qualified appliance repair
technician.
TO CLEAN
NEVER IMMERSE BASE IN WATER OR ANY OTHER LIQUID.
Be sure unit is unplugged before cleaning. Remove Cover from Base and
wash with warm, soapy water. Rinse and dry thoroughly. NEVER WASH
IN DISHWASHER. Use a slightly damp cloth or sponge to wipe the Base
and Popping Chamber clean, then dry with a soft cloth. DO NOT USE
ABRASIVE CLEANSERS OR SCOURING PADS.
TO STORE
Unplug unit; store in its box in a clean, dry place. Never store it while it is
hot or still plugged in. Use cord storage area on bottom of Base. Carefully
wrap cord around Cord Storage tabs and through the slot on the back of
the Base.Do not put any stress on the cord where it enters the unit, as it
could cause the cord to fray and break.
5
SD8PC3D Final.qxd 8/18/2003 10:02 AM Page 6