Samsung CLX-6220 - Manual (Page 135)

Supplies and accessories_ 8
- Open System: Authentication is not used, and encryption may
or may not be used, depending on the need for data security.
Enter the WEP Key using number keypad after selecting
Open System and then press OK.
- SharedKey: Authentication is used. A device that has a proper
WEP Key can access the network. Enter the WEP Key using
number keypad after selecting SharedKey and then press
OK.
• WPA-PSK or WPA2-PSK: You can select WPA-PSK or
WPA2-PSK to authenticate the print server based on WPA
Pre-Shared Key. This uses a shared secret key (generally called
Pre Shared Key passphrase) which is manually configured on
the access point and each of its clients.
a. Press OK when WPA-PSK or WPA2-PSK appears on the
bottom line of the display.
b. Press the up/down arrow to select TKIP or AES in Encryption
and press OK. If you select WPA2-PSK, press the up/down
arrow to select AES or TKIP + AES in Encryption and press
OK.
c. Enter the WPA Key using number keypad and press OK.
5.When you have finished, press Stop/Clear to return to the ready
mode. If you do not know about your wireless environment, please
ask the network administrator.
Disconnect the network cable (standard or crossover). Your
machine should then start communicating wirelessly with the
network. In case of Ad-hoc mode, you can use a wireless LAN and
wired LAN simultaneously.
Now go to "Installing network connected machine’s driver" on page 3.
Using SyncThru™ Web Service
For information about configuring and using the machine on a wireless
network environment, refer to the Wireless network install guide
provided with the wireless network interface card. You can also
configure the network parameters on the SyncThru™ Web Service.
Installing a hard disk
Installing the hard disk allows the data from your computer to be sent to the
print queue of the printer hard disk. This decreases the workload of the
computer. You can also use various print features, such as storing a job in
the hard disk, proofing a job, and printing private documents.
The order information is provided for optional hard disk (See "Available
accessories" on page 2).
Installing a hard disk
1. Turn the machine off and unplug all cables from the machine.
2. Remove the screws and remove the rear cover.
3. Remove the screws, then lift up the cover slightly and pull the cover to
the right.
1 Control board
cover
4. Take out a new hard disk from its plastic bag.
5. Align the connector on the hard disk with the connector on the control
board. Push the hard disk in until it is latched into place.
6. Fasten down the hard disk with the screws supplied with your new hard
disk; then reinstall the covers removed in steps 2 and 3.
7. Reconnect the power cord and machine cable. Turn on the machine.
8. You must activate the added hard disk in the driver properties
(See "Activating the added accessories in printer properties" on page 4).
Printing with the optional hard disk
After installing the optional hard disk, you can use advanced printing
features, such as storing or spooling a print job to the hard disk,
proofing a job, and specifying of printing a private job in the printer
properties window.
Once you have stored files in the hard disk, you can easily print or
delete the stored files using the control panel of your printer.
Storing a job
You can store jobs on the hard disk.
1.Open the document you want to print.
2.Select Print from the file menu. The Print window appears.
3.Select your machine from Select Printer list.
4.Click Properties or Preferences.
5.Click the Advanced tab and click Job Setting.
6.Select the print mode you want from the drop-down list
(See "Using help" on page 3).
7.Enter the user’s name and file name.
8.Click OK until the Print window is displayed.
9.Click OK or Print to start printing.
Printing or deleting a stored job
You can print or delete jobs stored on the hard disk.