How to wash automatically depends on the laundry – Samsung Washing Maching User Manual

Page 7

Advertising
background image

- 7 -

HOW TO WASH AUTOMATICALLY

DEPENDS ON THE LAUNDRY

Before starting washing, check the following;

Connect the water supply hose to the water tap. Leave a tap open. Plug the
power cord in. Make sure to lay down the drain hose.

WASHING FOR THE FIRST TIME

Before washing clothes for the first
time, you must run a complete cycle
without clothes. To do this:
1. Press the POWER button.
2. Pour a little detergent into

compartment

in the detergent

drawer.

3. Turn on the water supply to the

washing machine.

4. Press the Start/Hold button.

This will remove any water from the manufacturer's test run remaining in the
machine.

SPECIAL NOTES!

Automatic Sensing Function

At every course (except, wool course) the amount of laundry is
automatically sensed and then appropriate water level, washing time,
rinsing cycle, and spinning time are automatically selected for automatic
washing.

After the power is on, a course is selected and Start/Hold button is pressed.
Then, the washing board starts spinning without water. This action senses
how much laundry is in the washing basket, not a machine problem. After
this sensing process, water supplies automatically.

Adding Detergent and Softener

It senses the amount of laundry and indicates the water level and amount of
detergent. Then, it starts water supply right away.

During the water supply, it is possible to open the detergent box and add
detergent. However, it is better to press Start/Hold button to stop water
supply and add detergent. Close the lid and press Start/Hold button again.
This way is much more convenient.

If the softener is inserted in the softener dispenser, it automatically adds in
at the last rinsing cycle.

Put the laundry into the washer and add detergent, too.

Be careful not to overload. Use right detergent for the fabrics you are
washing.

DIGITAL COURSE

Selects the best washing course automatically.
1. Press the POWER Button to “ON”.
2. Press the START/HOLD button.

Water level is selected automatically. Washing rinsing, and spinning follow. If you
want to pause, press the START/HOLD button again. You can change the course
when paused.

3. Close the lid.

BLANKET / HEAVY COURSE

(Big volume laundry like blanket and bed cover sheets)

1. Press the power button to “ON”.
2. Press the course select button once.
3. Press the START/HOLD button.

Water level is selected automatically. Washing, rinsing, and spinning follow. If you
want to pause, press the START/HOLD button again. You can change the course
when paused.

4. Close the lid.

• Fold those big volume laundry (blanket and

bed cover sheets) in the following way
before adding into the spin basket.

• Do not wash the electric blanket and carpets.
• Get a laundry net for those light and big volume laundry (eg. Cashmeres)

because they might rise in the water and get damaged.

SOAK COURSE

1. Press the POWER button.
2. Press the course select button twice.
3. Press the START/HOLD button once.

Water level is selected automatically. Washing, rinsing, and spinning follow.

4. Close the lid.

DETERGENT

FABRIC SOFTENER

If the lid is open while running, the washing machine is stopped
automatically for safety. (Except, water supply continues while
the lid is open.)

When hot water is selected, both cold and hot water are sup-
plied for the first 20 seconds in order to protect the clothes.

Possible to control the washing time, rinsing cycle, and spin-
ning time at every course during the washing.

✽✩_✤✥K✴.❇m ✷❂❈❆ ✪ ✻❉❑❍■❅❂❖, M❂❍❄❉ ✤✫, ✥✣✣✧ ✥:✣✣ ✷M

Advertising