Samsung Washing Maching - Manual (Page 9)

- 9 -
MANUAL FUNCTIONS INSTALLATION & MAINTENANCE
The User’s Manual is for common use.
Make use of the User’s Manual depending upon your washing machine model.
■ ENVIRONMENT
Leave some space
Maintain at least 10cm between the washer and the wall.
Place the washer on a sturdy flat surface.
If the washer is placed on an uneven or weak surface, noise or vibration
occurs. (Allowable is 1
°)
Adjust the legs for even placement.
Never install the washer near water.
Do not place the washer in steamy rooms or where the washer is directly
exposed to rain. Moisture may destroy the electrical insulation causing an
electrical shock hazard.
Avoid direct sunlight or heaters.
As plastic an electrical components are affected by direct heat, never place the
washer near furnaces, boilers, etc. Do not place under direct sunlight.
■
LEVELLING
• If the washer is not leveled with the ground, it makes the machine tremble
more or be out of order. So, make sure that the washer is leveled properly.
WASH ONLY
Press the POWER button.
Press the WASH button.
Press the START/HOLD button.
Washing goes on for 20 minutes.
When the WASH button is pressed during washing, the
wash time can be changed to between 6 and 30 minutes
in duration.
RINSE ONLY
Press the RINSE button.
Press the START/HOLD button.
Rinsing goes on for 2 times.
When the RINSE button is pressed during rinsing, the
rinse times can be changed to between 1 to 5 times in
duration.
SPIN ONLY
Press the SPIN button.
Press the START/HOLD button.
Spin drying goes on for 10 minutes.
When the FUNCTION button is pressed during spinning,
the spin time can be changed to from 1 to 9 minutes.
WASH AND RINSE
Press the WASH and RINSE button.
Press the START/HOLD button once.
Detects the amount of laundry, and determines wash
and rinse time period automatically.
When the WASH and RINSE button is pressed during
working. Wash time period is determined between 6 and
30 minutes, and rinse time is determined between 1 and
5 times.
RINSE AND SPIN
Press the RINSE and SPIN button.
Press the START/HOLD button once.
Rinsing and spin drying follow.
When the RINSE and SPIN button is pressed during
working. The number of rinse times is determined
between 1 and 5, and spin time period for drying is
determined between 1 and 9 minutes.
WASH, RINSE AND SPIN
Press the WASH, RINSE AND SPIN button.
Press the START/HOLD button once.
WASH, RINSE AND SPIN is performed.
SEE IF THE MACHINE IS PLACED LEVEL BY CHECKING
THE POSITION OF THE WASHING TUB.
• Open the lid of the machine, pour
water into the tub up to the level just
below the pulsator, and adjust the legs
so that the pulsator is positioned at the
center of the water as shown in the
figure.
• Place the machine more than 10cm away from the wall.
• Adjust the legs on feet
❈ ❖, ,