Sony MZ-R55 - Manual (Page 14)

14-
GB
Checking the remaining
time or the recording
position
You can check the remaining time, track
number, etc. when recording or during
stop.
On the recorder
1
Press DISPLAY while recording or in
stop mode. Each time you press the
button, the display changes as
follows.
B
A
A
Track number
Track number
Current date 1)
B
Elapsed time
Remaining time for
recording
Current time 1)
While recording
1) Appears only when the clock is set.
DISPLAY REC indicator
3
While observing the level meter in
the display, adjust the recording level
by pressing
+ (+) or = (–).
Set the level so that it hits the –12dB
at maximum input level.
.
Note
Adjust the recording level while the
recorder is in standby mode. You
cannot adjust it while recording.
4
Press P again to start recording.
To stop recording, press p.
The recording level control is switched back
to automatic control when you record the
next time.
z
When you record with microphone input,
select the sensitivity with MIC SENS (page
12).
Volume decreases increases