Smeg AS 63 CS - Manual (Page 10)

10 - EN
Ending the program through canceling
The program which is selected first will keep on
going even if the position of the program selection
button is changed. A new program can be selected
and started after “Program cancel” is activated in
order to change the drying program.
In order to cancel the selected program; press
“Start/Pause/Cancel” button for about 3 seconds.
The “Filter cleaning”, “Water tank” and “End/ Anti-
creasing” warning LEDs will light up at the end of
this period for reminding purposes.
A
As the inside of the machine will be
excessively hot when you cancel the program
while the machine is running, activate the
ventilation program to cool it down.
A
If the machine is stopped during any
drying program, and if the position of the
program selection knob is changed, an audio
signal will be heard (if the “Cancel audio
warning” function is not selected).
The machine will not start even if the “Start/
Pause/Cancel” button is pressed, unless the
program selection knob is returned to the
initial program. The paused program must
be cancelled in order to change the drying
program.
End of program
The “End/Anti-creasing”, “Filter cleaning” and
“Water tank” warning LEDs on the program follow
up indicator will light up when the program comes
to an end. The door can be opened and the
machine becomes ready for a second cycle.
Press the “On/Off” button to shut down the
machine. Clean the filter and drain the water tank
after each drying.
Technical Specifications
Models
Condenser Dryer with electronic Sensor
control
Height / Height for built-under installation (cm) 85.0 / 82.0
Width (cm) 59.5
Depth / Depth for built-under installation (cm) 54
Height adjustment of feet (cm) 0.5
Lenght of drain hose (cm) 140
Diameter of drain hose (mm) 10
Highes point of the hose (cm) 80
Weight, unpacked (kg) 36
Voltage 230V ~ 50 Hz
Connected load 2200 W
Fuse protection 16A
This appliance’s packaging material is recyclable. Help recycle it and protect the environment
by dropping it off in the municipal receptacles provided for this purpose. Your appliance also
contains a great amount of recyclable material. It is marked with this label to indicate the
used appliances that should not be mixed with other waste. This way, the appliance recycling
organised by your manufacturer will be done under the best possible conditions, in compliance
with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact
your town hall or your retailer for the used appliance collection points closest to your home. We
thank you doing your part to protect the environment.