Sunbeam SH3200 - Manual (Page 11)

9
Changing the foil and cutter block
Shaving performance depends on the
condition of the foil and the cutter
block. Both will gradually wear out from
use. Therefore we recommend that the
foil is changed once a year and the
block every two years.
Replacing the foil
• Remove the shaver head by pressing the
shaver head release buttons.
• Pull the shaving foil out of the shaver
head by holding
it on the attached
straps (Figure 4).
• Place the new
shaving foil in
the shaver head
until it clicks into
place.
• Replace the shaver
head.
Care & Cleaning continued
Figure 4