Sunbeam SH3200 - Manual (Page 12)

10
Replacing the cutter block
• Remove the shaver head by pressing
the shaver head release buttons.
• Hold the cutter block on both sides
and lift it from its
support (Figure 5).
• Place the new
cutter block in
position.
• Replace the shaver
head.
Help Line
If you have any additional questions
about using the Euro Foil Shaver,
please call the Sunbeam help line in
Australia on 1800 025 059.
In New Zealand, please call
0800 786 232.
Care & Cleaning continued
Figure 5