Samsung Entro BMC-M350 - Manual (Page 101)

Settings 82
Sett
ings
7. Touch Save.
Touch Sensitivity
Your phone’s touchscreen requires a small amount of pressure to operate. The smaller the
size of your contact point on the display screen, the less amount of pressure required. The
tip of your finger will work better than the pad of your finger and a fingernail will require
even less pressure. Initially, your phone’s sensitivity is set to the highest level. When you
have discovered your preffered method of operating your touchscreen, you may find that it
is too sensitive for some applications. You can adjust how sensitive the phone is to touch
actions on the screen.
To adjust the touch sensitivity:
1. Touch Menu.
2. Touch Settings.
3. Touch General.
4. Touch Touch Sensitivity.
5. Touch and drag the slider left or right to adjust the sensitivity level.
6. Touch Touch here to gauge the response of the new sensitivity level.
Touch Calibration
The Touch Calibration feature allows you to re-align the screen’s touch accuracy. Use this
feature only when the device does not respond properly when you touch the screen.
To adjust the calibration:
1. Touch Menu.
2. Touch Settings.
3. Touch General.
4. Touch Touch Calibration.
5. Touch the center of the target and repeat this step as the target moves
around the four corners of the screen.
•
Touch Restore to restore the target to its original calibration.
•
Touch Retry to try the calibration again.
Note: When touching the screen in Calibration mode, you must touch the center of the
cross hair area.
6. When the calibration is completed, touch Yes to accept the calibration.