SOYO SY-K7VEMPRO V1.0 - Manual (Page 7)

SY-K7VEMPRO V1.0 Quick Start Guide
7
Har
dw
ar
e
Install
atio
n
Install the Motherboard
To perform the installation of your new SY-K7VEMPRO V1.0 Motherboard, follow the
steps below:
Step 1. CPU Installation
CPU Mount Procedure: To mount the AMD ® Athlon/Duron TM processor that you
have purchased separately, follow these instructions.
1. Lift the socket handle up to a vertical position.
2. Align the blunt edge of the CPU with the matching pinhole edge on the socket.
3. Seat the processor in the socket completely and without forcing.
4. Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to CPUFAN1 connector on the
Motherboard. The fan is a key component that stabilizes the system. It
prevents the equipment from overheating and prolongs the life of your CPU.
CPU Fan Installation
Your Socket A processor kit comes with a cooling fan. Mount the fan on the processor
according to the instructions provided by the manufacturer. The fan is a key component
that will ensure system stability. The fan prevents overheating, therefore prolonging the life
of your CPU.
Note: Remember to connect the fan to the appropriate power source.
1 1
3
4
2