SpectraLink 6020 - Manual (Page 20)

SpectraLink Corporation Configuration and Administration
Link 6020 Wireless Telephone
PN: 72-1204-00-B.doc Page 20
6. Site-Programmed Telephony Features
Advanced telephony features are programmed onsite according to the features
provided by the PBX. The MCU is programmed for system feature activation as
detailed in Link 150 M3 MCU: Installation and Operation or Link 3000 MCU:
Operator’s Console, depending on which type of system is installed in the facility.
During this process, the handset keypad is mapped to the features as described in the
LinkPlus Interface Guide that corresponds with the PBX system installed in the
facility.
The following table is provided so that the mapping can be recorded here. This same
table is also included in the Link 6020 Wireless Telephone and Accessories User Guide
(72-1201-00) and the Link 6020 Wireless Telephone Quick Reference Guide
(72-1202-00). The table in the guide may be customized with facility-specific
settings either by hand or with the Link 6020 Advanced Features Template (72-
1204-01) available on the SpectraLink Documentation CD or website.
The template allows you to customize this table in Microsoft Word and print it on
stock labels to be affixed to the guide. Open the template, fill in the table and
copy/paste it into the remaining cells. Print on stock labels (Avery address label
#5168).
Feature Key Press
Transfer FCN + _________
Forward FCN + _________
Conference FCN + _________
Camp on FCN + _________
Redial FCN + _________
Voicemail FCN + _________
Flash FCN + _________
Application mode FCN + _________
_________ FCN + _________
_________ FCN + _________
_________ FCN + _________
_________ FCN + _________
_________ FCN + _________
_________ FCN + _________