Samsung XM2go - Manual (Page 27)

Using Your Helix Alone
Using Your Helix Alone 27
ENG
Selecting Channels
Press the up or down arrow buttons to scroll through the list of channels.
– OR –
Press the number keys on the remote that correspond to the channel number.
– OR –
1. Press the left arrow button on your Helix. You will see a virtual keypad on the display.
2. Use the arrow buttons to select the
digits corresponding to the channel
number. Press the XM button after
highlighting each digit.
3. When you’ve entered a valid channel
number, your Helix will tune to that
channel within 2 seconds.